ABB OmniCore V400XT Product Manual page 84

3 Installation and commissioning
3.5.6 Connecting incoming mains and protective earth to the controller
Continued
Location of incoming mains connection
xx2200001755
Connection of protective earth
There are two options to connect the cabinet to protective earth:
xx2200001756
Required equipment
Equipment
Main connection cable (three-phase)
Continues on next page
84
• PE0 on front panel.
• PE1 and PE2 on X0 (incoming mains connector).
PE0
Note
All connections between the cabinet and protective earth must comply with the
local electrical requirements.
© Copyright 2022-2023 ABB. All rights reserved.
Note
L1, L2, L3, PE1, PE2
Details see Fitting the connector
for incoming mains on page
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
PE1
PE2
81.