ABB OmniCore V400XT Product Manual page 233

3
Refitting the main computer assembly
Refitting the main computer assembly
1
2
3
4
5
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
Remove the main computer assembly
from the mounting plate.
ELECTROSTATIC DISCHARGE
(ESD)
The unit must be maintained in an ESD-
safe environment.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit must be maintained in an ESD-
safe environment.
Refit the assembly onto the mounting
plate and tighten the screw.
Reconnect any connectors disconnected
at removal.
Apply cable ties and suitable cable pro-
tection to ensure that the cables may not
be damaged by the door.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.8 Replacing the main computer
Note/Illustration
xx2200001089
Note/Illustration
xx2200001089
Continues on next page
5 Repair
Continued
233