ABB OmniCore V400XT Product Manual page 123

Required spare parts
Spare part
Ethernet Extension switch [3014-
1]
Ethernet Harness
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V400XT
Installing the Ethernet extension switch
Preparations
1
2
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore V400XT via myABB Business Portal,
www.abb.com/myABB.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
Open the door.
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.3 Installing the Ethernet extension switch
Article number Note
3HAC059187-001 DSQC1035
3HAC084152-001 Harness A2.X4 - K4.X6
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC082020-008
Note/Illustration
Opening the door on page
Continued
424.
182.
Continues on next page
123