ABB OmniCore V400XT Product Manual page 136

3 Installation and commissioning
3.7.6 Installing the conveyor tracking module (CTM)
Continued
Required tools and equipment
Equipment
Standard toolkit
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V400XT
Application manual - Conveyor
tracking
Installing the conveyor tracking module
1
2
3
Continues on next page
136
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Open the door.
© Copyright 2022-2023 ABB. All rights reserved.
Article number Note
- Content is defined in section
Standard toolkit for controller on
page
-
Article number Note
3HAC082020-008
3HAC066561-001
Note/Illustration
Location of wrist strap button:
xx2300001842
Opening the door on page
Product manual - OmniCore V400XT
424.
182.
3HAC081697-001 Revision: A