ABB OmniCore V400XT Product Manual page 207

Refitting the Ethernet extension switch (option)
Refitting the Ethernet extension switch (option)
1
2
3
4
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Hook up the Ethernet extension switch
to the bracket and then push the switch
into position.
Note
During the installation, there should be
no gap between the upper surface of the
Ethernet extension switch and the lower
surface of highest bracket on the main
computer.
xx1800000972
Reconnect any connectors disconnected
at removal.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.3 Replacing the Ethernet switch (DSQC1035)
Note/Illustration
Location of wrist strap button:
xx2300001842
xx2300001835
5 Repair
Continued
Continues on next page
207