ABB OmniCore V400XT Product Manual page 152

3 Installation and commissioning
3.7.10 Installing the DeviceNet board
Continued
Equipment
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V400XT
Installing the DeviceNet board
Preparations
1
2
3
Installing the DeviceNet board
1
2
3
Continues on next page
152
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
Open the door.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Loosen the screws that hold the cover
plate.
Remove the cover plate from the main
computer assembly.
Insert the DeviceNet board into the slot
in the main computer assembly.
© Copyright 2022-2023 ABB. All rights reserved.
Article number Note
-
Article number Note
3HAC082020-008
Note/Illustration
Opening the door on page
Location of wrist strap button:
xx2300001842
Note/Illustration
Product manual - OmniCore V400XT
182.
3HAC081697-001 Revision: A