ABB OmniCore V400XT Product Manual page 218

5 Repair
5.2.5 Replacing the 4G Connected Services gateway
Continued
Disconnecting the antenna
1
2
3
4
5
Continues on next page
218
Action
Record the cable routing when you re-
move the antenna cable from the cabinet.
Disconnect the antenna cable from the
Connected Services gateway by rotating
the connector.
Remove any cable ties and protection.
Pull the cable out through the cable
grommet.
Remove the magnet part of the antenna
from the cabinet.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
Note
The Connected Services antenna is installed
by the customer, and the cable routing can
therefore differ.
xx2300000672
xx2200001973
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A