Table of Contents
Advertisement
Refitting the power unit
Refitting the power unit
1
2
3
4
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see
Electrical safety on
page
29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section
The unit is sensitive to
ESD on page
45.
Position the power unit on the lower
guiding pin on the mounting plate, and
then tip the unit upwards against the up-
per guiding pin. Secure the screws.
Reconnect any connectors disconnected
at removal.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.10 Replacing the power unit
Note/Illustration
Location of wrist strap button:
xx2300001842
Screws: Torx pan head screw M4x8 (4 pcs)
Tightening torque: 2 Nm
xx2100000322
Continues on next page
5 Repair
Continued
245
Advertisement
Table of Contents
Troubleshooting
