ABB OmniCore V400XT Product Manual page 127

Location
The illustration shows the location of the additional drive unit in the controller.
xx2300001799
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
WARNING
Do not touch the drive unit when the DC-BUS High Voltage LED is on.
There is residual voltage in the drive unit even if the main switch is in the OFF
position.
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
3.7.4 Installing additional drive units
Continues on next page
Continued
127