ABB OmniCore V400XT Product Manual page 267

Refitting the additional drive unit
Refitting the additional drive unit
1
2
3
4
Concluding procedure
1
2
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Refit the additional drive unit and secure
with the screws.
Reconnect any connectors disconnected
at removal.
Action
Close the door.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.14 Replacing the additional drive unit
Note/Illustration
Location of wrist strap button:
xx2300001842
Screws: Torx pan head screw M4x8 (4 pcs)
Tightening torque: 2 Nm
xx2200001375
Note/Illustration
Closing the door on page
5 Repair
Continued
183.
267