ABB OmniCore V400XT Product Manual page 291

2
3
4
5
Refitting the motor connector
Refitting the motor connector
1
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
Remove the attachment screws on the
connector.
Push the motor connector into the cabin-
et.
Take the motor connector cable out from
the velcro in the cabinet.
Note
Make records about the sequence that
cables are removed. The cables need to
be installed in the same position.
Take out the motor connector.
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
© Copyright 2022-2023 ABB. All rights reserved.
5.3.2.1 Replacing the motor connector
Note/Illustration
xx2100000813
Note/Illustration
Continues on next page
5 Repair
Continued
291