ABB OmniCore V400XT Product Manual page 62

3 Installation and commissioning
3.4.3 Mounting the FlexPendant holder
Continued
Use this procedure to mount the bracket for the emergency stop to the FlexPendant
holder.
1
2
3
4
Continues on next page
62
Action
Remove the four screws.
Separate the rear part from the FlexPend-
ant holder.
Insert the bracket into the FlexPendant
holder.
Secure with the screws.
© Copyright 2022-2023 ABB. All rights reserved.
Note/illustration
xx2000002356
xx2100000765
Screws: BN33 Phillips pan head tapping
screw ST2.9x13 (3 pcs)
Tightening torque: 6 Nm-7.8 Nm
xx2100000766
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A