ABB OmniCore V400XT Product Manual page 306

5 Repair
5.3.4 Replacing the cable grommet assembly
Continued
Refitting the cable grommet assembly
Refitting the cables to the cable grommet assembly
1
2
3
Continues on next page
306
Action
Insert and equip the cable to the corres-
ponding KT grommet.
Slide the grommets into the frame halves.
Note
It must be ensured that the flat side of
the grommets in the lower row are point-
ing to the open side of the frame half (flat
sides pointing upwards).
Note
The fl at side of the grommets in the up-
per row have to point downwards so that
all flat sides rest on each other. When
using single row frames the fl at side has
to point towards the cover strip.
Refit the cover strip onto the frame.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
xx1900002337
xx1900002336
xx1900002335
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A