ABB OmniCore V400XT Product Manual page 51

FCC statement
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
Operation is subject to the following conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by ABB could void the user's
authority to operate the equipment under FCC rules. When the optional connectivity
module is installed, the operating conditions must be such that there is a minimum
separation distance of 20 cm between the dedicated antenna and nearby persons
or other antennas. An intentional radiator may be operated only with the antenna
which it is authorized for and accepted by ABB.
The product may be equipped with a connectivity module for 3G or for Wi-Fi as an
option.
The product may be equipped with a connectivity module for 4G or for Wi-Fi as an
option.
ABB legal contacts for FCC:
John Bubnikovich, ABB Robotics, 1250 Brown Road, Auburn Hills, MI 48326 USA,
john.bubnikovich1@us.abb.com
Ed Marchese, ABB Robotics, 1250 Brown Road, Auburn Hills, MI 48326 USA,
ed.marchese@us.abb.com
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Note
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules.
• The 3G option contains FCC ID: XMR201510UC20 by courtesy of Quectel
• The 4G option contains FCC ID: XMR201909EC21AUX by courtesy of Quectel
• The Wi-Fi option contains FCC ID: Z64-WL18SBMOD by courtesy of Texas
Instruments
© Copyright 2022-2023 ABB. All rights reserved.
2 Controller description
2.8 ABB Connect (ABB Ability)
Continued
Continues on next page
51