ABB OmniCore V400XT Product Manual page 318

5 Repair
5.3.6 Replacing the LED indicator
Continued
3
Removing the LED indicator
1
2
3
4
Continues on next page
318
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Loose the attachment screws locking the
cable.
Remove the terminals (X1&X2) of the
cable from the lamp.
Turn the MON_LAMP screw anti-clock-
wise to remove the screw.
Take the LED indicator out.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2300001842
Note/Illustration
xx1900001926
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A