ABB OmniCore V400XT Product Manual page 325

Removing the joystick protection
1
2
3
4
Refitting the joystick protection
1
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Disconnect the FlexPendant from the
controller.
Remove the attachment screws.
Remove the joystick protection.
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
© Copyright 2022-2023 ABB. All rights reserved.
5.4.2 Replacing the joystick protection
Note/Illustration
xx1800001198
xx1800001199
Note/Illustration
Continues on next page
5 Repair
Continued
325