ABB OmniCore V400XT Product Manual page 319

Refitting the LED indicator
Refitting the LED indicator
1
2
3
4
Concluding procedure
1
2
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Insert the LED indicator into the cover
from outer side of the door and the screw
from inner side and screw them up.
Insert the terminals (X1 & X2) of cables
into the lamp and secure with the screws.
Action
Close the door.
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 171.
© Copyright 2022-2023 ABB. All rights reserved.
5.3.6 Replacing the LED indicator
Note/Illustration
xx1900001926
Note/Illustration
Closing the door on page
5 Repair
Continued
183.
319