ABB OmniCore V400XT Product Manual page 321

Equipment
ESD protective wrist band
Required documents
Document
Circuit diagram - OmniCore
V400XT
Removing the power cable and power cable cover
1
2
3
4
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
5.4.1 Replacing the power cable and power cable cover
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Disconnect the FlexPendant from the
controller.
Remove the attachment screws for the
power cable cover.
Remove the power cable cover.
© Copyright 2022-2023 ABB. All rights reserved.
Article number Note
-
Article number Note
3HAC082020-008
Note/Illustration
xx1800001189
xx1800001190
5 Repair
Continued
Continues on next page
321