Safety Signals And Symbols; Safety Signals In The Manual - ABB OmniCore V400XT Product Manual

1 Safety

1.2.1 Safety signals in the manual

1.2 Safety signals and symbols

1.2.1 Safety signals in the manual
Introduction to safety signals
This section specifies all safety signals used in the user manuals. Each signal
consists of:
Hazard levels
The table below defines the captions specifying the hazard levels used throughout
this manual.
Symbol
Continues on next page
16
• A caption specifying the hazard level (DANGER, WARNING, or CAUTION)
and the type of hazard.
• Instruction about how to reduce the hazard to an acceptable level.
• A brief description of remaining hazards, if not adequately reduced.
Designation
DANGER
WARNING
ELECTRICAL
SHOCK
CAUTION
ELECTROSTATIC
DISCHARGE (ESD)
NOTE
© Copyright 2022-2023 ABB. All rights reserved.
Significance
Signal word used to indicate an imminently hazard-
ous situation which, if not avoided, will result in ser-
ious injury.
Signal word used to indicate a potentially hazardous
situation which, if not avoided, could result in serious
injury.
Signal word used to indicate a potentially hazardous
situation related to electrical hazards which, if not
avoided, could result in serious injury.
Signal word used to indicate a potentially hazardous
situation which, if not avoided, could result in slight
injury.
Signal word used to indicate a potentially hazardous
situation which, if not avoided, could result in severe
damage to the product.
Signal word used to indicate important facts and
conditions.
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A