ABB OmniCore V400XT Product Manual page 284

5 Repair
5.2.18 Replacing the break resistor bleeder
Continued
Refitting the break resistor bleeder
Refitting the break resistor bleeder
1
2
3
Continues on next page
284
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Refit the break resistor bleeder and se-
cure the screws.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2300001842
xx2200001074
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A