ABB OmniCore V400XT Product Manual page 257

Refitting the DSQC 634 power supply
Refitting the power supply
1
2
3
4
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Hang the power supply into the bracket
and push the lower of it until you hear a
clear clicking sound.
Reconnect any connectors disconnected
at removal.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.12 Replacing the power supply
Note/Illustration
Location of wrist strap button:
xx2300001842
xx1900001950
Continues on next page
5 Repair
Continued
257