ABB OmniCore V400XT Product Manual page 253

3
Removing the power supply
1
2
3
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Action
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 45.
Action
Remove the end clamp besides the
power supply with a screwdriver.
Disconnect all connectors from the unit
to be replaced.
Remove the screw and the power supply.
© Copyright 2022-2023 ABB. All rights reserved.
5.2.12 Replacing the power supply
Note/Illustration
Location of wrist strap button:
xx2300001842
Note/Illustration
xx1900001907
xx1900001908
Continues on next page
5 Repair
Continued
253