Table of Contents
Advertisement
5 Repair
5.2.13 Replacing the drive unit
Continued
Refitting the drive unit
Refitting the drive unit
1
2
3
4
Continues on next page
262
Action
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see
Electrical safety on
page
29.
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section
The unit is sensitive to
ESD on page
45.
Position the drive unit on the lower guid-
ing pin on the mounting plate, and then
tip the unit upwards against the upper
guiding pin. Secure the screws.
Reconnect any connectors disconnected
at removal.
© Copyright 2022-2023 ABB. All rights reserved.
Note/Illustration
Location of wrist strap button:
xx2300001842
Screws: Torx pan head screw M4x8 (4 pcs)
Tightening torque: 2 Nm
xx2100000338
Product manual - OmniCore V400XT
3HAC081697-001 Revision: A
Advertisement
Table of Contents
Troubleshooting
