Table 42 Led 8 (Status Of Field Supply Voltage); Table 43 Led 12 (Teach-In Function, Channel 1), Led 14 (Teach-In Function, Channel 2); Table 44 Led 15 (Parameterization Status); Table 45 Led 16 (Module Error) - WAGO 750 Product Manual

Diagnostics
State
Green
Off
State
Yellow
Yellow,
flashing
Off
State
Yellow
Yellow,
flashing
Off
State
Red
Off
70 Product manual | Version: 1.1.0
Proportional Valve Module 2-3-4
Explanation
Field supply voltage OK
Undervoltage
Table 43: LED 12 (Teach-in Function, Channel 1), LED 14 (Teach-in Function, Channel 2)
Explanation
Teach-in function active
Teach-in function disrupted
Teach-in function inactive
Explanation
Parameterization process
Parameterization error
Parameter set correct
Explanation
Module error
No module error
Table 42: LED 8 (Status of Field Supply Voltage)
Cause
–
Field supply undervoltage
Cause
–
An error occurred during teach-
in.
–
Table 44: LED 15 (Parameterization Status)
Cause
I/O module is parameterized.
Internal error
–
Cause
Undervoltage
Overtemperature
–
750-1632/000-100
Remedy
–
Check power supply and wiring.
Remedy
–
Cancel teach-in function (bit
TEACH_EN = 0, bit PWR_EN =
0)
–
Remedy
–
–
–
Table 45: LED 16 (Module Error)
Remedy
Check supply voltage.
Reduce ambient temperature or
target current.
–