Technical Condition Of Specified Devices - WAGO I/O System 750 Manual

Hide thumbs Also See for I/O System 750:
Table of Contents

Advertisement

16
Important Notes
The operation of the product in residential areas without further measures is only
permitted if the product complies with the emission limits (interference emissions)
according to EN 61000-6-3.
Operating the product in home applications without further measures is only
permitted if it meets the emission limits (emissions of interference) according to
EN 61000-6-3. Please observe the installation regulations!
You will find the relevant information in the section "Device Description" >
"Standards and Guidelines" in the manual for the used product.
Appropriate housing (per 2014/34/EU) is required when operating the WAGO I/O
System 750 in hazardous environments. Please note that a prototype test
certificate must be obtained that confirms the correct installation of the system in
a housing or switch cabinet.
The implementation of safety functions such as EMERGENCY STOP or safety
door monitoring must only be performed by the F I/O modules within the modular
WAGO I/O System 750. Only these safe F I/O modules ensure functional safety
in accordance with the latest international standards. WAGO's interference-free
output modules can be controlled by the safety function.
2.1.4

Technical Condition of Specified Devices

The devices to be supplied ex works are equipped with hardware and software
configurations, which meet the individual application requirements. These
modules contain no parts that can be serviced or repaired by the user. The
following actions will result in the exclusion of liability on the part of WAGO GmbH
& Co. KG:
Repairs,
Changes to the hardware or software that are not described in the
operating instructions,
Improper use of the components.
Further details are given in the contractual agreements. Please send your
request for modified and new hardware or software configurations directly to
WAGO GmbH & Co. KG.
Manual
Version 1.7.0, valid from FW Version 04.01.10(23)
WAGO I/O System 750
750-8210/040-000 PFC200; G2; 4ETH; XTR

Advertisement

Table of Contents
loading

This manual is also suitable for:

750-8210/040-000

Table of Contents