Data Exchange Module; Ssi Transmitter Interface Modules; Table 157: Serial Interface Modules 750-652, 753-652; Table 158: Data Exchange Module 750-654, -654/000-001 - WAGO I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-354/000-001 EtherCAT® Fieldbus Coupler, ID Switch

Table 157: Serial Interface Modules 750-652, 753-652

Input and Output Process Image
Process
image
size
8 bytes
24 bytes*
48 bytes
*)
Factory setting
11.2.5.6

Data Exchange Module

750-654, -654/000-001
The Data Exchange modules have a total of 4 bytes of user data in both the Input
and Output Process Image. The following tables illustrate the Input and Output
Process Image, which has a total of 2 words mapped into each image.
Word alignment is applied.

Table 158: Data Exchange Module 750-654, -654/000-001

Input and Output Process Image
Offset
0
1
11.2.5.7

SSI Transmitter Interface Modules

750-630 (and all variations)
The process image of the / 003-000-variants depends on the parameterized
operating mode!
The operating mode of the configurable /003-000 I/O module versions can be
set. Based on the operating mode, the process image of these I/O modules is
then the same as that of the respective version.
The above SSI Transmitter Interface modules have a total of 4 bytes of user data
in the Input Process Image, which has 2 words mapped into the image.
Word alignment is applied.
Byte Designation
Offset
High Byte
0 C1/S1
1 D1
2 D3
3 D5
4 D7
...
11 D21
12 D23
...
23 D45
Byte Designation
High Byte
D1
D3
Low Byte
Control/Status byte
C0/S0
C1/S1
D0
D2
D4
D6
Prozess data (6-46 bytes)
D20
D22
D44
Low Byte
D0
D2
I/O Modules 175
Description
Control/Status byte
C0/S0
Description
Data bytes
Manual
Version 1.2.1