Table 43 0765-4501/0100-0000 Io-Link Product - Currents In Supply Cable; Table 44 0765-4501/0100-0000 Io-Link Product - Currents In Supply Cable 2; Table 45: Rules For Supply Cables 1 And 2 - WAGO TEchDocs 765-4501/0100-0000 Manual

765-4501/0100-0000
Current
I
logic
I ,
X01_1L
I ,
X02_1L
I
module_1L
For supply cable 2 of the 0765-4501/0100-0000 IO-Link product, the currents declared in
the following table must be taken into account:
Current
I
X31_2L
I
X32_2L
I
module_2L
For this product, supply cable 2 is only used for transmission between the PWR IN (X31)
and PWR OUT (X32) connections.
During operation of the 0765-4501/0100-0000 IO-Link product, the rules below for the
currents in supply cables 1 and 2 must be followed at all times:
Current
Total current for the supply cable
(rule 1)
Permissible current feedthrough
(rule 2)
Ports
Supply current on pin 1 (rule 3)
Signal current on pin 2/4 in normal
operation
(rule 3)
Signal current on pin 2/4 in overload
operation
(rule 3)
Reverse current to pin 3 (ground)
(rule 3)
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
I
..., X08_1L
Table 44: 0765-4501/0100-0000 IO-Link Product – Currents in Supply Cable 2
Description
Logic supply
Total current for supply cable 1 at digital input/output port X0i (i.e., port
X01, X02, ..., X08) corresponds to the current I
This current is the sum of the currents on pins 1, 2 and 4 of port X0i:
I = I = I + I
X0i_1L X0i_pin3_1L X0i_pin1_1L X0i_pin2_1L
Module current I
module_1L =
I + I + ...+ I
X01_pin3_1L X02_pin3_1L X08_pin3_1L
Description
Current to connection PWR IN (X31): current 2L+ / reverse current 2L−
Current to connection PWR OUT (X32): current 2L+ / reverse current 2L−
Module current I = 0
module_2L
Supply Cable 1
I ≤ 16 A
X31_1L
I = I + I I
X31_1L logic X32_1L + module_1L
I ≤ 16 A – I - I
X32_1L logic module_1L
Ports X01, ... , X08 (henceforth
summarized as port X0i for 1 ≤ i ≤ 8)
I ≤ 4 A
X0i_pin1_1L
I ≤ 2 A
X0i_pin2_1L
I ≤ 2 A
X0i_pin4_1L
I ≤ 2.4 A
X0i_pin2_1L
I ≤ 2.4 A
X0i_pin4_1L
I ≤ 4 A
X0i_pin3_1L
at pin 3 (ground).
X0i_pin3_1L
+ I
X0i_pin4_1L
Table 45: Rules for Supply Cables 1 and 2
Supply Line 2
I ≤ 16 A
X31_2L
I = I + I
X31_2L X32_2L module_2L
I ≤ 16 A - I
X32_2L module_2L
-
-
-
-
-
Planning
59