Figure 13: Wago-I/O-Check Context Menu „Settings" (Example) - WAGO 750-482/000-001 Manual

52 Operating Modes
5. When the coupler/controller has booted up click [Identify] on the toolbar.
The set-up of your fieldbus node will be automatically detected and shown
graphically in the node view and also in the navigation bar as a tree
structure
6. Move the mouse pointer to the graphical representation of the HART I/O
module or to the I/O module designation "0750-0484" in the tree structure
and select "Settings" from the context menu (right mouse button).
Figure 13: WAGO-I/O-CHECK Context Menu „Settings" (Example)
7. In the dialog window that opens for making the settings select the required
operating mode and then click "Write".
8. In the dialog window that opens for making the settings select the required
operating mode and then click "Write".
When the parameters have been set successfully, this will be indicated by a
message.
Additional Information about WAGO-I/O-CHECK
You will find a detailed description of the functions and use of the commissioning
tool in the WAGO-I/O-CHECK (759-302) manual on the Internet under:
www.wago.com
Manual
Version 1.0.2
750-482/000-001 2AI 4-20mA HART NAMUR NE43
WAGO I/O System 750