WAGO I/O System 750
750-1491 2AI Resistor Bridge (Strain Gauge)
Figure 19: WAGO-I/O-CHECK User Interface (Example)
After the node structure has been identified in WAGO-I/O-CHECK, it appears in
the overview area.
To open specific parameterization dialogs for the 750-1491 I/O Module, proceed
as follows:
1.
Select the I/O module. The representation of the I/O module is marked.
2.
Right-click to open the context menu and select the Settings menu item.
The parameterization dialog appears. This forms the basis for the following
explanation.
Commissioning
57
Manual
Version 1.0.0