Table of Contents
Advertisement
Macro operation
„ Timing chart
1. Turn the S-ON input ON.
2. Check the READY output is being ON.
3. Turn the FW-JOG-H input (or RV-JOG-H input) ON.
The READY output is turned OFF, the MOVE output is turned ON, and the motor starts operation.
4. Turn the FW-JOG-H input (or RV-JOG-H input) OFF.
The motor starts deceleration stop.
5. When the motor stops, the READY output is turned ON and the MOVE output is turned OFF.
FW-JOG-H input
RV-JOG-H input
S-ON input
READY output
MOVE output
Internal speed command
FW-JOG-H input
RV-JOG-H input
S-ON input
READY output
MOVE output
Internal speed command
* 2 ms or less
88
ON
3
OFF
ON
OFF
1
ON
OFF
2
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
60 ms or less
ON
OFF
ON
OFF
4
2
5
*
*
*
*
3
4
5
*
*
*
*
Advertisement
Table of Contents
