Orientalmotor AZX Series Operating Manual page 163

z MAREA output
The MAREA output is turned ON when the motor is within the set area.
Related parameter
MEXE02
Name
code
MAREA output
p7
source
Related operation data
MEXE02
Name
code
Area offset
p1
Area width
Motor operation
ON
MAREA output
OFF
Setting example 1:
When MAREA is turned ON in a range of ±10 steps with the position of 5,000 steps as a center in
incremental positioning operation which travel distance is 10.000 steps.
• Area offset: −5,000 steps
• Area width: 10 steps
Setting example 2:
When MAREA is turned ON in a range of ±100 steps with the coordinate 1,000 as a center in absolute
positioning operation from the present position 5,000 steps to the target position −8.000 steps.
• Area offset: 9,000 steps
• Area width: 100 steps
When "Operation type" of the operation data is set to "Continuous operation (Position control)," the
offset (area) is based on the operation starting position.
Description
Sets the criterion to turn the MAREA
output ON and the status of the MAREA
output after operation.
Description
Sets the distance from the center position of the
range in which the MAREA output is turned ON to
the target position of positioning operation.
Sets the distance to the operation starting position
in the case of continuous operation.
Sets the range in which the MAREA output is
turned ON.
O set
Width Width
Setting range
0: Feedback position (ON after
operation)
1: Command position (ON after
operation)
2: Feedback position (MAREA
output OFF at completion)
3: Command position (MAREA
output OFF at completion)
Setting range
−2,147,483,648 to
2,147,483,647 steps
−1: Disable
0 to 4,194,303 steps
Output signals
Initial
value
0
Initial
value
0
−1
163