Orientalmotor AZX Series Operating Manual page 71

z When the data destination is set to "1: Buffer memory"
If the TRIG is turned from OFF to ON or the data corresponding to the trigger is changed, the next direct data is saved
in the buffer memory. When the data during operation is completed, operation of the buffer memory is automatically
started. One set of direct data can be stored in the buffer memory.
If the next direct data is written to the buffer memory, the DCMD-FULL output is turned ON.
During stop or continuous operation, if "Buffer memory" is specified, the data is not saved in the buffer memory and is
rewritten to the next direct data immediately.
DCMD-RDY outpu
TRIG
Bu er memory
Data destination
Execution memory
Direct data
Direct data
bu er memory
MOVE outpu
DCMD-FULL outpu
ON
OFF
ON
OFF
A
ON
A
OFF
ON
OFF
B C
B C
B C
Direct data operation
D E
D E
71