Orientalmotor AZX Series Operating Manual page 303

„ NS LED
This LED indicates the communication status of EtherNet/IP.
LED status
Green Red
• This is in an offline state.
No light No light
• The control power supply of the driver is not turned on.
Blinking No light This is in an online state. Connection has not been established with the scanner.
Light No light This is in an online state. Connection is being established with the scanner.
No light Blinking Connection with the scanner became time-out.
No light Light The setting of an IP address is duplicated in the same system.
Blinking alternately Self-diagnosis when turning on the power is being executed.
The timing to blink the LED is as follows.
500 ms
ON
Blinking
OFF
„ L/A LED
This LED indicates the LINK/ACT status of EtherNet/IP.
LED status
• This is in an offline state.
No light
• The frame of EtherNet/IP is not sent and received.
• This is in an online state.
Blinking
• The frame of EtherNet/IP is sent and received.
• This is in an online state.
Light
• The frame of EtherNet/IP is not sent and received.
Description
500 ms
Description
Indication of LEDs
303