Table of Contents
Advertisement
Stratasys J850/J835 User Guide
Using This Guide
This user guide provides instructions for installing, operating and maintaining
Stratasys J850/J835 3D printing systems, including Digital Anatomy printers
and printers enabled by 3DFashion technology. It explains how to use
features, and provides practical examples to guide you as you use the system.
Important: Read the entire Safety chapter before using the system.
The text and figures in this guide are based on the J850 3D printer, software
versions D78.1 - 85.2.0; D83.1 - 84.01.0.
This guide assumes that—
• all the hardware, software, and network components of your system are
• the operator has a working knowledge of the Windows
Visit the
document. This document is also available on the Support Center in other
languages.
If you have any questions or comments about the way information is presented
in this guide, or if you have any suggestions for future editions, please send a
message to c-support@stratasys.com.
DOC-18001 Rev. N
installed, configured, and operating correctly.
Stratasys Support Center
to download the latest revision of this
1 About This Guide
®
PC platform.
1-2
Advertisement
Table of Contents
