ABB IRB 120 Product Manual page 123

Refitting plastic covers
Use this procedure to refit the plastic covers.
3HAC035728-001 Revision: B
Action
1. Before fitting the plastic cover, check it for
cracks or any other damage.
2. Fit the plastic cover and secure it with its
attachment screws.
Which attachment screws to use is described in
the table:
• Attachment screws and tightening
torques on page 120
3. For tightening torques, see the table:
• Attachment screws and tightening
torques on page 120
4.4.1. Replacing plastic covers
Info
If the plastic cover is cracked or has
any other damage it must be replaced
with a new one.
4 Repair
Continued
121