Emc Information - Planmeca ProMax X-ray Instruction Manual

EMC INFORMATION

7 EMC INFORMATION
WARNING
WARNING
Planmeca ProMax X-ray unit is intended for use in the electromagnetic environment specified
below. The customer or the user of the Planmeca ProMax X-ray unit should assure that it is used
in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Technical Manual
Use of any accessories and cables other than those specified in Planmeca Pro-
Max X-ray unit's documentation, with exception of cables sold by Planmeca as
replacement parts for internal components, may result in increased emission
or decreased immunity of the X-ray unit.
Planmeca ProMax X-ray unit should not be used adjacent to or stacked with
other equipment. If adjacent or stacked use is necessary, the Planmeca ProMax
X-ray unit should be observed to verify normal operation in configuration
which it will be used.
Guidance and manufacturer's declaration - electromagnetic emissions
Compliance Electromagnetic environment – guidance
Planmeca ProMax X-ray unit uses RF energy
only for its internal function. Therefore, its RF
Group 1
emissions are very low and are not likely to
cause any interference in nearby electronic
equipment.
Planmeca ProMax X-ray unit is suitable for use
in all establishments, including domestic estab-
Class B
lishments and those directly connected to the
public low-voltage power supply network that
supplies buildings used for domestic purposes.
Class A
Complies
Chapter A - GENERAL & TECHNICAL DATA
ProMax X-ray unit with Dimax3 A-13