Table of Contents
Advertisement
HELP AND ERROR MESSAGE SHORT-FORM TABLES
1.6 Power supply related errors (5xx)
Error
Explanation
code
E501
Power supply
E502
E503
E504
E505
E506
E507
1.7 Communication errors (6xx)
Error
Explanation
code
E601
Internal (CAM)
E602
E603
E604
E605
E606
E607
E608
Technical Manual
High voltage DC bus voltage missing
(fuse blown)
26VDC bus voltage too high
26VDC bus voltage too low
Heatsink temperature sensor failure
Power off did not function
Power supply overload (short)
Mains frequency is out of bounds
Total data communication failure towards
CAM
Total data communication failure from
CAM
Data errors received at CAM
Data errors received from CAM
No clock signal received at CAM
Data received is wrong polarity at CAM
No clock signal received from CAM
Data received is wrong polarity from
CAM
Chapter C - ERROR MESSAGES
Comments
Check the power supply, voltage
and
the
cabling.
change the fuse.
Check the voltage.
Check the voltage.
Check the sensor.
Check the power supply.
Check the power supply.
Check the mains voltage and the
power supply.
Comments
Exposure not possible. Check the
cable of the CAM PCB and that it
is installed correctly.
Exposure not possible. Check the
cable of the CAM PCB and that it
is installed correctly.
Exposure interrupted. Check the
cable of the CAM PCB and that it
is installed correctly.
Exposure interrupted.Check the
cable of the CAM PCB and that it
is installed correctly.
Check the cable of the CAM PCB
and that it is installed correctly.
Check the functionality of the bat-
tery and that it is installed cor-
rectly.
Check the cable of the CAM PCB
and that it is installed correctly.
Check the cable of the CAM PCB
and that it is installed correctly.
Check the functionality of the bat-
tery and that it is installed cor-
rectly.
Check the cable of the CAM PCB
and that it is installed correctly.
ProMax X-ray unit with Dimax3 C-11
If
needed
Advertisement
Table of Contents
