Table of Contents
Advertisement
REPLACING PCBS
6.3 Input PCB
WARNING
Technical Manual
The X-ray unit contains live mains voltage parts. Always unplug the unit from mains
outlet before attempting to service the Input module.
Detach all the cables (e.g. power supply cable and exposure switch cable) from their Input
module connectors. If the X-ray unit is equipped with a locking plate, it must be removed first.
Unscrew the two M4X12 DIN7984 screws on the plate with a 2.5 mm Allen key and remove
the plate..
Unscrew these
screws
Locking
plate
Chapter G - COLUMN
ProMax X-ray unit with Dimax3 G-37
Advertisement
Table of Contents
