Table of Contents
Advertisement
Chapter B - INFORMATION DISPLAYS
2 USER PREFERENCE SETTINGS
From the list of Information displays select User preference settings (i200) . In this mode you
can set the date and time, perform visual adjustments and select unit's behavioural prefer-
ences and language.
Figure 2
2.1 Setting date and time
The clock is set at the factory to local time and it should be set to show the correct time/date
before using the unit.
To set time select Set time of day on the Date & time display (i210) . If you want to change
date, select Set date. If you want to change the time and date display format, select Date &
time display format.
Figure 3
B-4 ProMax X-ray unit with Dimax3
USER PREFERENCE SETTINGS
Technical Manual
Advertisement
Table of Contents
