Table of Contents
Advertisement
HELP AND ERROR MESSAGE SHORT-FORM TABLES
Error
Explanation
code
H171
User
tures
H172
H175
H176
H177
H178
H179
H180
1.3 Motorized motion related errors (2xx)
Error
Explanation
code
E201
MCM (motor control
module) -module
E202
overheated
E203
E204
E205
E206
E207
E208
Technical Manual
handled
fea-
Dimax3 sensor head not installed prop-
erly to C-arm
Dimax3 sensor head not installed prop-
erly to Cephalostat
PC program selection in conflict with
selected ProMax X-ray unit program
Safety area limit violation in tomography
mode. Change layer thickness, position
or angle
One or more image layers will not be
exposed with these settings
Imaging impossible with selected set-
tings.
The cassette number is missing
AEC not available
1 - shoulder motor
2 - elbow motor
3 - temple support/Dimax3 CEPH scan
4 - C-arm rotation motor
5 - receptor pan / X&Y collimation
6 - receptor rotation
7 - for receptor lift (reserved option)/ X&Y
collimation
8 - for tube head lift function (reserved
option)
Chapter C - ERROR MESSAGES
Comments
The
sensor
has
installed and/or locked on its
position.
The
sensor
has
installed and/or locked on its
position.
Wrong exposure mode has been
selected on the PC.
Change the values for layer thick-
ness, position or the angle.
Change the exposure settings.
Change the exposure settings.
Enter the cassette number.
The AEC licence is not available
or not activated.
Comments
Exposure interrupted.
Exposure interrupted.
Exposure interrupted.
Exposure interrupted.
Exposure interrupted.
Exposure interrupted.
Exposure interrupted.
Exposure interrupted.
ProMax X-ray unit with Dimax3 C-3
not
been
not
been
Advertisement
Table of Contents
