Technical Specifications - Planmeca ProMax X-ray Instruction Manual

TECHNICAL SPECIFICATIONS

4 TECHNICAL SPECIFICATIONS
Technical Manual
Generator
X-ray tube
Focal spot size
Total filtration
Anode voltage
Anode current
Cooling period
Exposure time
SID
Magnification
CCD pixel size
Image pixel size
CCD active surface
Image field
Line voltage
Line current
Line harmonics:
Maximum mains resistance
Maximum continuous
heat dissipation
Electrical classification
Fuses
REPLACEABLE FUSES
2 pieces (user replaceable)
Chapter A - GENERAL & TECHNICAL DATA
Resonant-mode, DSP-controlled, 80...160 kHz
complies with the standard EC 60601-2-7: 1998
Toshiba D-054SB-P
0.5 x 0.5mm
according to IEC 336
min. 2.5 mm Al
Tomo 54 - 84 kV ±5%
Panoramic 54 - 84 kV ±5%
Cephalometric 60 - 84 kV ±5%
Tomo 1 - 16 mA ±10%
Panoramic 1 - 16 mA ±10%
Cephalometric 1 - 16 mA ±10%
Automatically controlled
Panoramic 2.5 - 16 s as indicated ±10%
Tomo 4 - 12 s as indicated ±10%
Transtomo 24 - 95 s as indicated ±10%
Cephalometric
Normal: 12 - 18.7 s as indicated ±10%
High speed: 6 - 9.3 s as indicated ±10%
Panoramic and Tomo 500 mm (20 in.)
Cephalometric 170 cm (67 in.)
Panoramic constant 1.2
Tomo constant 1.5
Cephalometric constant 1.13
33 μm
99/130 μm
Panoramic 9 x 136 mm (0.35 x 5.35 in.)
Cephalometric 9 x 270 mm (0.35 x 10.6 in.)
Panoramic 14 x 30 cm (5.5 x 12 in.)
Cephalometric 27 x 30 cm (11 x 12 in.)
100 - 132 V~ / 50- 60 Hz
180 - 240 V~ / 50 Hz
8 - 15 A
cos better than 0.9
0.2 Ω (100 - 132 V~)
0.4 Ω (220 -240 V~)
< 250W
Class I, type B
180-240V~ 100-132V~
8A FF 16A FF /500V 195100 ELU
ProMax X-ray unit with Dimax3 A-3
TYPE