Special Operation Mode Selection - Planmeca ProMax X-ray Instruction Manual

SERVICE SETTINGS

5.1 Special operation mode selection

5.1.1 Enable Admark
5.1.2 Demo licences
5.1.3 Enable high speed ceph
5.1.4 Enable Bitewing
Technical Manual
From the list of Service settings select Special operation mode selection (i510) .
Figure 35
This features is only available in a film X-ray unit.
The Demo licences option allows you to demonstrate all the ProMax X-ray programs. When
this option is selected no radiation is generated when you press the exposure button. The
programs can be selected and the C-arm will move normally but no radiation will be gener-
ated and no radiation warning signals will be given, i.e. this is a "dummy run" function for train-
ing and demonstration purposes.
This option allows you to enable the high speed ceph function. This feature enables you to
take an exposure with a higher sensor speed, i.e. the exposure time is shorter.
This option allows you to enable the Bitewing exposure program. You will need a special
licence code for this program. Read detailed instructions given in the user's manual.
Chapter B - INFORMATION DISPLAYS
ProMax X-ray unit with Dimax3 B-23