Renesas R8C/18 Series Hardware Manual page 200

R8C/18 Group, R8C/19 Group
Figure 17.8 shows the Timing of Suspend Operation.
1
FMR00 bit in
FMR0 register
0
1
FMR46 bit in
FMR4 register
0
1
FMR44 bit in
FMR4 register
0
1
FMR43 bit in
FMR4 register
0
Figure 17.8 Timing of Suspend Operation
Rev.1.30 Apr 14, 2006
REJ09B0222-0130
Erasure Erasure Programming
starts suspends starts
During
During
programming
erasure
Check that the
FMR43 bit is set to 1
(during erasure
execution), and that
the erase-operation
has not ended.
Page 185 of 233
Programming Programming Programming
suspends restarts ends
During
programming
Check that the Check the status,
FMR44 bit is set to 1 and that the
(during program programming ends
execution), and that normally.
the program has not
ended.
17. Flash Memory Version
Erasure Erasure
restarts ends
During
erasure
Check the status,
and that the
erasure ends
normally.