Upload And Download Files Using Sftp - Digi IX20 User Manual

File system
admin@192.168.4.1's password: adminpwd
IX20-23.9.74.0.bin
>
Transfer a file from the IX20 device to a remote host
To copy a file from the IX20 device to a remote host, use the
> scp host hostname-or-ip user username remote remote-path local local-path to
remote
where:
n hostname-or-ip is the hostname or IP address of the remote host.
n username is the name of the user on the remote host.
n remote-path is the location on the remote host where the file will be copied.
n local-path is the path and filename on the IX20 device.
For example:
To copy a support report from the IX20 device to a remote host at the IP address of 192.168.4.1:
1. Use the system support-report command to generate the report:
> system support-report path /var/log/
Saving support report to /var/log/support-report-0040D0133536-23-09-29-
12:10:00.bin
Support report saved.
>
2. Use the scp command to transfer the report to a remote host:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/var/log/support-report-00:40:D0:13:35:36-23-09-29-12:10:00.bin to remote
admin@192.168.4.1's password: adminpwd
support-report-0040D0133536-23-09-29-12:10:00.bin
>

Upload and download files using SFTP

Transfer a file from a remote host to the IX20 device
This example uploads firmware from a remote host to the IX20 device with an IP address of
192.168.2.1, using the username ahmed:
$ sftp ahmed@192.168.2.1
Password:
Connected to 192.168.2.1
sftp> put IX20-23.9.74.0
Uploading IX20-23.9.74.0 to IX20-23.9.74.0
IX20-23.9.74.0
100% 24M
sftp> exit
$
IX20 User Guide
830.4KB/s 00:00
Upload and download files
100% 36MB 11.1MB/s
scp command as follows:
00:03
1075