Operation Outlines - Tektronix DG2030 User Manual

Reference

Operation Outlines

3 2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 3-1 and Figure 3-1 show a typical example for operation flow from
creating and editing pattern data to outputing it.
Creating and editing pattern
data and/or sequence
Operations with the Edit menu
and front panel buttons and knob.
Figure 3 1: Operation flow for pattern data output #1
Creating and editing pattern
data and/or sequence
Operations with the Edit menu
and front panel buttons and knob.
As well as pattern data, the setup information is also
stored in the file. When you recall stored data from a
file, the DG2030 will also be set up. You can prepare
various data pattern to be used for inspecting
facilities and/or checking in production lines.
Pattern data acquired with logic analyzer or
oscilloscope can be imported to the DG2030. They
are also used as test patterns for circuit designs.
Figure 3 2: Operation flow for pattern data output #2
Setting output parameters,
run mode and trigger
Operations with the Setup menu
and front panel buttons and knob.
Setting output parameters,
run mode and trigger
Operations with the Setup menu
and front panel buttons and knob.
Outputing pattern data
Operations with the
START/STOP, STEP/EVENT
and FORCE TRIGGER buttons
on the front panel. Operations
may also be performed with
external signals coming from
remote controller or another
equipments.
Created and edited pattern data
can be stored in a file together
with the setup information.
Outputing pattern data
Operations with the
START/STOP, STEP/EVENT
and FORCE TRIGGER buttons
on the front panel. Operations
may also be performed with
external signals coming from
remote controller or another
equipments.
DG2030 User Manual