Rotating - Tektronix DG2030 User Manual

Edit Menu

Rotating

3 40
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The DG2030 provides several methods for rotating data in timing, hexadecimal,
or binary display.
Timing. In timing display you can rotate data using any one of the following:
H Rotate left
H Rotate right
The cursor becomes the area cursor. The data inside the editing area is rotated
one point to the left or right. Data that overflows the editing area cycles around
and is added at the left or right of the edit area. Figures 3-34 and 3-35 illustrate
the different rotating selections for timing.
Before
Execution
Rotate Left by 1 Point
After
Execution
Figure 3 34: Rotate left
Before
Execution
Rotate Right by 1 Point
After
Execution
Figure 3 35: Rotate right
If Rotate region left/right is selected when the Select arrow key function item
is selected in the Settings menu, data can be rotated to the left or right with the
arrow buttons.
Editing Area
Editing Area
DG2030 User Manual