Add Block Delimiter Here - Tektronix DG2030 User Manual

Edit Menu
Block 1
Move to Previous Block Move to Block Start
Figure 3 13: Block relative cursor movement

Add Block Delimiter Here

3 26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Current Cursor Position
Move to Block End
Block 2 Block 3
Move to Next Block
Operation. Block Relative Cursor Movement
Bottom button
Block
Sets a block delimiter at the current cursor position. The delimiter point becomes
the starting point of the new block. The block delimiter is marked on the point
scale.
NOTE. A block delimiter cannot be set at a point that is not at least 90 points
away from both the start and the end of the block in which the delimiter is being
set.
Before
Division
90 Points or Over
After
Block 1
Division
Figure 3 14: Dividing a block
Move to Block (Any)
Popup menu
Select from the following items.
Move to block start
Move to block end
Move to next block
Move to previous block
Move to block (any)
Select the block to move to.
(Move to block (any) only)
Current Cursor Position
Block 1
90 Points or Over
Block 2
Set a Block Delimiter
Block n
Side button
OK
OK
Block 3
Block 3
DG2030 User Manual