Typical Characteristics - Tektronix DG2030 User Manual

Typical Characteristics

Table A 3: Electrical characteristics (typical)
Characteristics
Data and clock out
Rise/fall time (20 % to 80 %)
Value in FAST
Aberration
Overshoot
Amplitude (clock out)
Period jitter
Cycle to cycle jitter
Inhibit input
Delay time to data to clock out
High Z to High Z
High Z to High Z
Sync output
Level
V
OH
V
OL
Delay time from external trigger
input signal
Trigger Input
Delay time to clock out and
data out
External clock input
Delay time to clock out
DG2030 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
This section will describe the typical characteristics for the DG2030. These
values represent typical or average performance and are not absolutely guaran-
teed.
Description
500 ps, at 0.25 Vp p to 1 Vp p
t Value represented by FAST line from 2 Vp p to 5 Vp p in Figure A 2 on page A 5, at 1 Vp p
to 2 Vp p
t 0.8 Minimum value, at 2 Vp p to 5 Vp p
x 5 % at 3.5 Vp p
x 5 % at 3.5 Vp p
Measured by TDS694C-1MHD with TDSJIT1
Refer to Table A 4.
Measured by TDS694C-1MHD with TDSJIT1
Refer to Table A 5.
Refer to T and T in Figure A 2 on page A 5.
d3 d4
34 ns
38 ns
Approx. 5 V (into 1 MW)
Approx. 2.5 V (into 50 W)
Approx. 0 V (into both 1 MW and 50 W)
Internal clock, PLL Off. Refer to T
57 ns + 1/F x T x 57 ns + 2/F
clk (GHz) d1
13 ns, Refer to T in Figure A 2 on page A 5.
d2
36 ns. Refer to T in Figure A 2 on page A 5.
d6
Appendix A: Specifications
in Figure A 2 on page A 5.
d1
clk (GHz)
A 7