Tektronix DG2030 User Manual page 87

Operating Examples
Creating Block 1 Data
2 52
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
6. Divide the data from point 256 to point 383 between block 3 (256 to 383)
and block 4 (384 to 511). Use BK4 as the name for block 3. Confirm that the
knob icon appears in the Cursor window in the upper left of the screen. If
the icon is not in that window, move it there with the front panel CURSOR
button.
Menu button Bottom button
Block
7. Change the name for block 1 to BK1. Confirm that the knob icon appears in
the Cursor window in the upper left of the screen. If the icon is not in that
window, move it there with the front panel CURSOR button.
Menu button Bottom button
Block
8. Create a binary up-counter data in block 1. First make sure that the value of
the Cursor window in the upper left of the screen is 0. Set that value to 0 if it
is not already 0. Then perform the following operations.
Menu button Bottom button
Execute
Action
Popup menu Side button
Add block OK
delimiter here
Clear String
BK4 OK
Popup menu Side button
Rename OK
current block
Clear String
BK1 OK
Popup menu Side button
Binary up OK
counter
OK
Front panel
button
384
ENTER
Front panel
button
0
ENTER
Front panel
button
1
ENTER
EXECUTE
DG2030 User Manual