Tektronix DG2030 User Manual page 80

Setting Sampling Clock
Frequency
Setting Signal Generation
Mode
Setting Output Level
DG2030 User Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
4. Set the sampling clock frequency to 50 MHz.
Menu button Bottom button
Clock
5. Set the signal generation mode to continuous mode.
Menu button Bottom button
Run Mode
6. Set the channel CH0 to CH7 output levels to 3 V for the high level and –1 V
for the low level.
Menu button Bottom button
Level Condition
Select channel CH0 by pressing the front panel up and down arrow buttons.
Set the output levels for channels CH1 to CH7 in the same manner.
Popup menu Side button
Source
(Select Int.)
Int FREQ
PLL
(Select On.)
Popup menu Side button
Repeat
Popup menu Side button
High
Low
Operating Examples
Front panel
button
50
MHz
Front panel
button
Front panel
button
3
ENTER
-1
ENTER
2 45